Vehicle regulation
Insight and control
An up-to-date and, if desired, automated system for incoming and outgoing truck traffic. With several options for limiting the traffic on your construction site - you just want to be able to work without worries.
Vehicle regulation variants & specifications
Swing gate double 6m extended (package)
The gate leaves can turn through approx. 180° and can be horizontally adjusted, so that they will always hang straight and turn smoothly. Gate leaves wider than 3 metres have double top rails to eliminate the need of diagonal braces - which would be helpful for intruders who want to climb the gate. The locks are sturdy and it is virtually impossible to force entrance by sabotaging them. It is then impossible to lift the gate out.
Specifications
- Dimensions Width : 6400 mm
- Dimensions Height : 3000 mm
- Dimensions Depth : 140 mm
- Package quantity : 1
Downloads
Installation instructions
42/60 High Security coupler + Hinge ring
Specifications
- Dimensions Width : 150 mm
- Dimensions Height : 55 mm
- Dimensions Depth : 3 mm
- Package quantity : 15
Downloads
Installation instructions
Mobile Fence Lock Bracket
You can use hinges and wheels to turn two mobile fences into a temporary swing gate. This lock bracket then ensures that the fences are absolutely tight when no activities are carried out on the site. The fences are kept tightly together and the lock is vandalism-proof.
Specifications
- Dimensions Depth : 40 mm
- Package quantity : 5
Downloads
Installation instructions
Hinge with noose
This allows you to easily create a simple swing gate of 7 meters wide for lorries and other traffic on a building site. And you can lock the gate securely with the Heras mobile fence lock. Especially useful for semi-permanent applications.
Specifications
- Dimensions Width : 70 mm
- Dimensions Height : 100 mm
- Dimensions Depth : 40 mm
- Package quantity : 20
Downloads
Installation instructions
Sliding fence construction set
Applicable in the existing fence line. This gate construction is practical, easy applicable and safe. This solution is used as access to temporary building
projects or to create emergency exits. The sliding gate construction is easy to install between temporary or semi-permanent fencing. Thanks to an optimal
tuning and the implementation in galvanized steel this fence is overall very robust. You thus ensure optimal safety on and around your building site or event.
Specifications
- Dimensions Width : 3593 mm
- Dimensions Height : 2135 mm
- Dimensions Depth : 150 mm
- Package quantity : 0
Downloads
Installation instructions
M500 Sliding gate 7m Electric
The cantilever M500 sliding gate was developed specifically for temporary use. Its flexibility enables controlled access to temporary building projects. Due to the limited time span of a project, a ‘normal’ sliding gate would not easily be an economic investment. Heras delivers the M500 sliding gate pre-assembled on an industrial floor slab. Including remote control.
Specifications
- Dimensions Width : 8640 mm
- Dimensions Height : 2000 mm
- Dimensions Depth : 200 mm
- Package quantity : 1
- Certification : EN
- Certification : CE
- Mesh opening Height : 200 mm
- Mesh opening Width : 50 mm
Downloads
Installation instructions
A clear-cut gateway in the fencing line
With the high-security clamp, you prevent the creation of entrances and exits all along the construction fencing line. Install a construction fence with a tarpaulin immediately adjacent to the temporary gateway or boom barrier. On this tarpaulin print the rules and regulations of the terrain. Or use it to inform the neighbours about the progress of the construction process.
Innovative construction on a postage stamp
There were enough challenges in this project in finding a suitable solution. For example, installing on a postage-stamp-sized area and a busy street for the supply route.
- John van Roon
from UBA Bouw
Boskalis completes N69 with 6 km of Heras mobile fences
In 2020, Boskalis laid the N69 with a Luikerweg connection to the A67 motorway. Six kilometres of mobile fences were needed to allow the work to be completed safely.
- Ben Helderop
from Boskalis Nederland B.V.
The surface varied at one site requiring three different assembly methods that provided a single sturdy enclosure of neat appearance.
Heras staff stood out by delivering a customised solution to us per our requirements and that allowed for the terrain.
- Evert Bourel
from Groep Van Roey nv